AG捕鱼

Welcome to the official website of Legret Metal Company
Focus on electronic welding for 20 yearsDONGGUAN LEGRET METAL.,LTD
National consultation hotline:135-2799-2739
Contact US
mobile phone: 135-2799-2739
Service hotline: 0769-38893080
Email: lzd@dglzd.com
Address: Dongguan lvzhidao Metal Co., Ltd
Contact person: Manager Zeng
Industry information

What are the factors that affect the thickness of the laser steel mesh of the red paste used in the placement process?

作者:Lvzhidao solder factory 2021-04-24 0

What are the usual considerations for the thickness of laser wire mesh with red glue solder paste?


The thickness of the paste wire mesh is considered by the precision of the welding layer of electronic components. High precision electronic components are made of thin steel sheet, and large welding layer components are made of thick steel sheet. The thickness of solder paste mesh is usually between 0.08-0.18mm, and that of red glue mesh is between 0.15-0.3mm. Which components are high precision?


Generally, 0201 components can use 0.08mm thin steel plate, 0402 components can use 0.1mm thin steel plate, 0603 components can use 0.12mm thin steel plate... It is based on the size of resistance and capacitance components to judge, then a PCB board is not only such, but also IC, BGA and other components, in this case, it must be based on the minimum IC interval to judge the thickness of wire mesh, Otherwise, too thin will be less tin, too thick will be more tin. The thickness of steel wire mesh is one of the most important factors affecting the quality of steel wire mesh.

er=http___i03.c.aliimg.jpg

sitemap网站地图